跳至产品信息
Black solar wall light with monocrystalline panel and three LED lenses, white background

Solar Wall Light 2-Pack — 3-Sided Glow, 3 LED Spotlight, IPX4, Auto On at Dusk

Inquiry for Best Price
Light Color

Solar Wall Light 2-Pack — 3-Sided Glow

Two compact solar wall lights that charge in daylight and switch themselves on at dusk. Each fitting carries three LED lenses — one at the front, one on each side — so a pair spreads a wide, focused wash across walls, fences, steps and patios. No wiring, no electrician, no running cost.

Highlights

  • Three-sided illumination — 3 LED lenses per light with convex spot optics for a bright centre beam plus side spill
  • Monocrystalline 5V panel — keeps charging through overcast weather
  • 1800mAh built-in battery — 6–8 hours of light after a 4–6 hour charge in direct sun
  • 72LM ±2LM per light — warm white 2800–3200K for a soft garden glow
  • IPX4 waterproof rating — rain- and snow-resistant housing (manufacturer’s own lab data)
  • Light-sensing control — on at dusk, off at dawn; press the button once to arm it
  • Wire-free mounting — screws or the 3M adhesive pad, a few minutes per light

Two light colours

  • Warm Light — 2800–3200K warm white, the calm default for walls, paths and patios.
  • Colorful — RGB output for a decorative wash along fences, gardens and balconies.

The two lights in a box share the same light colour.

Specifications (per light)

  • Model: YH0628
  • Light source: 3 × LED, three-sided arrangement
  • Brightness: 72LM ±2LM
  • Colour temperature: 2800–3200K (Warm Light); RGB (Colorful)
  • Solar panel: monocrystalline silicon, 5V
  • Battery: 3.7V / 1800mAh, built-in
  • Charging time: 4–6 hours in direct sunlight
  • Operating time: 6–8 hours
  • Waterproof rating: IPX4 (data sourced from the manufacturer’s own lab)
  • Material: ABS + PMMA
  • Colour: black
  • Unit size: 14.2 × 8.9 × 9.5 cm
  • Mounting: wall-mounted, drill or adhesive
  • Control: light sensor with ON/OFF push button

How it works

Each panel absorbs daylight and stores the energy in its built-in battery; the light sensor then switches the LEDs on at dusk and off at dawn. Mount both lights where the panel faces direct sun — shaded or indoor positions stop the battery charging and the light will not run. This is a solar charging limitation, not a fault.

Mounting

Drill mount: mark the bracket with the positioning card, drill, fix with the supplied screws and expansion bolts, then hang the light. Adhesive mount: arm the switch, apply the 3M pad to a clean flat surface and press the light on. Both take a few minutes and need no wiring.

What’s in the box

2 × solar wall light, mounting screws and expansion bolts for both, positioning card, instruction manual.

您可能还会喜欢